Quasar (Reverb)
Essentials
Quasar is a versatile reverb with Pre-delay, Decay, Damping, filtering, modulation, and mix—great for subtle rooms to vast atmospheres. Creates echoes of sound, imitating how sound behaves in physical spaces.
Pre-delay, decay, and damping controls
Filtering and modulation
Mix control for wet/dry balance
From subtle rooms to vast atmospheres
Main
Pre-delay |
Time before the reverb tail starts (0-1000 ms) |
|---|---|
Decay |
Controls the decay duration of the plate reverb tail (0-100%). 0 = maximum decay time, 100% = minimum decay time |
Damping |
Dampening factor of the plate decay (0-100%). 100% = maximum dampening, 0% = minimum dampening. Restricts the vibration of the plate |
Diffuse
Input |
The first of two diffusion parameters that “diffuses” the input signal across time (-100 to 100%) |
|---|---|
Tank |
The second of two diffusion parameters that “diffuses” the input signal across time (-100 to 100%) |
Filters
HPF |
Highpass filter frequency, removes low frequencies (20-20000 Hz). Applied to the signal after the pre-delay |
|---|---|
LPF |
Lowpass filter frequency, removes high frequencies (20-20000 Hz). Applied to the signal after the pre-delay |
Slope |
Filter slope:
|
Vibrato
Amount |
Depth of the vibrato (0-100%). 0% = no vibrato, 100% = maximum vibrato. Creates a “flutter” effect on the reverb tail |
|---|---|
Frequency |
Frequency of the vibrato (0.01-20 Hz) |
Output
Dry |
Gain factor for the dry signal (not affected by reverb). Equivalent to a dB range of -∞ to 0 dB (0-100%) |
|---|---|
Wet |
Gain factor for the wet (reverberated) signal. Equivalent to a dB range of -∞ to 0 dB (0-100%) |
On/Off |
Activates or bypasses the effect |
Practical Tips
Practical Tips
Use Pre-delay for rhythmic separation.
Use HPF to keep the low end clean.
Increase Decay and Vibrato Amount for ethereal spaces.
Automate Wet/Dry for creative transitions.